DIGITUS 2.5″ SATA hard drive adapter M.2 or mSATA

Description

Digitus 2.5″ SATA Hard Drive Adapter M.2 or mSATA. Product type: SSD enclosure. Number of supported storage drives: 1. Storage drive size: 2.5″. Supported storage drive interfaces: M.2, mSATA. Data transfer rate: 6 Gbps. Installed storage drive type: SSD. Product color: Black.

Use an M.2 or mSATA SSD as a 2.5″ hard drive for your PC or notebook

– Suitable for M.2 SSD (2230, 2242, 2260, 2280) with B-Key or B+M-Key
– Suitable for mSATA SSD (full size)
– Allows booting from the built-in SSD

With the DIGITUS® 2.5″ SATA hard drive adapter, you can cost-effectively increase system speed and performance by installing an M.2 or mSATA SSD in your PC or notebook. The hard drive adapter is used like a standard 2.5″ hard drive with a SATA III connector, and its low installation height of just 7 mm allows it to be installed in all common notebooks. The following M.2 (NGFF) SSDs are supported: M.2 type 2230, 2242, 2260, 2280 with B-Key and B+M-Key. M.2 PCIe NVMe SSDs with M-Key are not supported. Furthermore, mSATA SSDs with a Mini PCIe 52-pin connector are supported as a full-size variant. The installed SSD is selected via a DIP switch on the circuit board. The adapter supports boot processes for all standard operating systems such as Windows, Mac OS, or Linux. The internal SSD storage is protected from dust and damage by the fully enclosed aluminum housing. The SATA III interface offers a data transfer rate of 6 Gbps, and read speeds of up to 520 MB/s, depending on the SSD used. The adapter supports SATA Rev. 3.2 with DEVSLP power saving mode.